Reflections är en stämningslampa som med hjälp av invävd fiberoptik lockar fram nya visuella och taktila uttrycksvärdeni en textil. Under arbetets gång har jag utforskat mängden ljus som fiberoptisk textil sprider längsmed fiberlängden samt undersökt naturfiberns egenskaper när den vävs samman med fiberoptik.En stor utmaning var att hitta balans mellan tekniska begränsningar och det uttryck jag sökte. Lampans formspråkär min reflektion över dagens stadslandskap där arkitekturens geometriska former möterfordons strömlinjeform. Med stämningslampan hoppas jag att hitta och inspirera till nya användningsområdenför fiberoptisk textil.Reflections is a mood light using interwoven fiber optics witch brings out new visual and tactile expressionvalues in a textile. During the work, I have explored the amount of light fiber optic textile spreads along thefiber length and examined properties of nature fiber when it is interwoven with fiber optics.A major challenge was finding a balance between technical constraints and expressions I was looking for.

This report presents thesis of Liisa Kokkonen in collaboration with Muovikilpi Oy.The project?s goal is to find a new construction for an existing lamp made of acrylic. Form and design retains and the manufacturing occurs at Muovikilpi Oy. The project contains the new construction and manufacturing of the lamp and also a proposition for a set with floor and wall lamp.  The paper gives an outline of acrylic as material and how it reacts with light.

The report describes the thesis I, Philip Bergstrom, have done at the University of Gotland. The work comprises 15 credits and is at bachelor level and has been done in collaboration with Lyktan Bankeryd Belysning.The project consists of developing the design of a kitchen lamp for the Swedish home following the catchwords stripped French bistro that will fit into the Lyktan Bankeryd lighting spring collection 2013, and it should not look too alike any existing lamp on the market today.The work includes analysis of the company's current products and the image the company wants to project, analysis of three other companies' products to draw inspiration from, and a simple ergonomic study of the lights in the kitchen.The final result achieves the demands made and fits well in the intended environment, there is also the possibility for further development of both a floor lamp and a wall lamp..

Alzheimers sjukdom är den vanligaste orsaken till demens och i samband med att befolkningen blir större och allt äldre ökar även antalet patienter. Vid sjukdomen sker en hjärnatrofi och de mikroskopiska fynd man ser är extracellulära plack av ?-amyloid, intracellulära neurofibriller av fosforylerat tau och förlust av nervcellsutskott, axoner, synapser och dendriter. Några av de tidiga patologiska förändringarna man kan se är störningar i nervcellernas lysosomala system som fyller en viktig roll vid nedbrytning av makromolekyler. I en tidigare studie har man påvisat förhöjda nivåer av proteiner från det lysosomala systemet i cerebrospinalvätska.

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

Tree fiber lengths controls properties like strength and smoothness in paper and other wood products. For forest researchers it is of interest to be able to determine the fiber lengths in standing trees. Mo?rling et al. (2003), among others, have developed methods to estimate fiber length distributions in standing trees without damaging them.

Abstract? ?there is no reason?to assume that prehistorians cannot study ancient symbolism and beliefs. The question remains, however, how best to study symbolism within the material confines of archaeological research?(Fogelin 2007:63)With my essay I would like to bring up the meaning of the soapstonelamp for the Thule culture in Greenland. Humans in the arctic area, from the same in the north of Scandinavia to the inuites in Greenland, have a common way of viewing the world that stems from anemismen.

Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

Leber´s hereditary optic neuropathy (LHON), a disease affecting vision, is caused by several point mutations in mitochondrial DNA. Mutations leading to a defect NADH ubiquinone oxidoreductase protein will affect the respiratory chain and cause a disturbed ATP production. It is still unknown why this defect leads to the degeneration of retinal ganglion cells and cells in the opticus nerve as well as demyelination of axons in these areas. Analysis of mitochondrial DNA is an important tool in the diagnosis of the disease. At the present time analysis is based on cleavage by restriction enzymes, which only detects two of the most frequent mutations: m.3460G>A and m.11778G>A.

The objective of this study was to examine how an IT department has been affected by the changes of increased local usage of IT, and how the usage have affected municipalities IT departments demands of IT support. In the study we explore how both the IT department and the IT support works by interviewing present and former employees at the local IT department. The current IT department have undergone a series of local changes over the last 20 years, the department has gone from only having internal users to getting the entire municipalitiy?s agencies of IT as users. It started with how the municipality began to dig down fiber optic cable in the middle of the 1990?s, and today has started to develop solutions as to how to meet the demands of future usage of IT.

Zambia is a country in Southern Africa where poverty is widespread and the traditional keeping of local poultry therefore plays a crucial role in improving nutrition. Meat and eggs from poultry are important sources of protein but also of income. Improving the poultry production is thereby a method to fight poverty. For poultry, the access to light is an important factor for both growth and egg production. In this paper, the focus is on the traditional village chickens used for both egg and meat production, how they are kept, their health and welfare and if the use of a solar lamp will influence their behaviour, growth and egg production. Three studies were conducted in Chibombo and Choma Districts in Zambia were 17 farmers were interviewed regarding the village chicken management of which six farmers participated in a solar lamp experiment.

AbstractToday there is an opportunity to reinforce concrete with steel fiber reinforcement. In some cases, completely replace the conventional reinforcement. Replacing conventional mesh reinforcement with steel fiber reinforcement in slabs on ground has shown economic benefits, less crack width and less reinforcement amount.Today there are no Swedish standard for designing steel fiber reinforced concrete, what is there is different international recommendations.In this work, design methods for steel fiber concrete are used according to RILEM and Bekaer Swedish AB's software DRAPRO. For other design methods Eurokod 2 is followed.In this work, the design of slabs on ground that are not exposed by large tension strength been designed. Design of crack-reinforcement and restrictions of crack width have been conducted in three different slabs on ground.The calculations have been performed using only conventional reinforcement and only steel fiber reinforcement, and the results are then compared.The results of the theoretical analysis are summarized in tables that compare the amount of reinforcement, crack width and economic cost.This work showed that the slabs on the ground reinforced with steel fibers provide less crack width with a minor amount of reinforcement.

Inspired by how to sketch a light cone from a flashlight in a comic I wanted to create an armature carried only by its own light cone. To manage this challenge I sketched in an architectural and sculptural way, where I chose to ignore the function of the lamp as long as possible.As a result I developed an armature with a stunning shape, with an illusion that it was carried by its own light cone. It could be hanged on a wall, placed on a table, pushed against a ceiling or standing on the floor.Depending of its size the light cone from the light source lightens up the surface and draws attention to the otherwise forgotten wallpaper or the undisposed statue in the darkness of the city..

This thesis aims to investigate SAAB AB´s possibilities to use synthetic instruments in their test systems. The reason for this is reducing costs and the risk of obsolescence which is common when test systems operate for several decades.The market around synthetic instruments has been explored in the search for suitable hardware and software. Software has been developed in LabVIEW and synthetic instruments have been created with the help of IVI-drivers. The hardware consisted of PXI-instruments (Waveform generator and Digitizer), connected to a computer using a fiber optic link and PXI-chassi. The created instruments was then compared to common instruments used today, and the comparison turned out well.